Follow the remaining prompts to perform the update. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK.
From the Save In: field, click the down arrow then click to select Desktop and click Save.
This seems to be a problem in BIOS 1.08 as shipped with the box (as mentioned above).
BIOS 1.08 offers the following options for "Wireless Power Control": "Disabled", or "Switch by AP".
My mistake was that, based on previous issues others had in the past, I thought I needed to updated jme driver and the latest BIOS for the Shuttle. Shuttle BIOS 1.08, and the jme driver that comes with the install (v1.0.8) turned out to work OK. Start with: $ networkctl WARNING: systemd-networkd is not running, output will be incomplete.
IDX LINK TYPE OPERATIONAL SETUP 1 lo loopback n/a unmanaged 2 enp2s0f5 ether n/a unmanaged 3 wlp3s0 wlan n/a unmanaged 3 links listed.
On the server editions the ethernet is not detected either.
I have seen posts on getting the wireless working with a flash of the bois but I still haven't managed to get this working even with the new bois. In the bare-bones machine I put 2G of RAM and a cheap Seagate Momentus 250G HD.
I bought a Shuttle XS35 specifically to use as a media centre for my lounge room.
Installation of Ubuntu 10.10 was a breeze up until it was time to reboot.
Both RAM and CPU seem to use about 1/4 capacity and remote PHP development does almost nothing to spike these resources.